常问问题

Spectronics Corporation invented fluorescent leak detection in 1955. Today, we are the world’s leading manufacturer of ultraviolet equipment and fluorescent leak detection dye. Spectroline products are OEM-grade, co-solvent free, NSF certified, and can safely remain within AC&R systems.

只需将我们的专利荧光染料添加到可疑系统中。让染料循环流动。染料渗入系统后，用我们的高强度泄漏检测手电筒扫描泄漏点。所有泄漏点都会因逸散的荧光染料而发出耀眼的光芒，即使是针孔泄漏和间歇性泄漏也不例外。

In small-to-medium sized systems, you can find leaks within minutes. In commercial systems, it may take a few hours for the dye to circulate completely. For preventative maintenance, add Spectroline dye long before you have a problem. A technician can perform an inspection within a matter of seconds if the dye has already had time to fully circulate.

Spectroline® fluorescent leak detection dye is engineered to be fully-miscible. It is, by definition, a non-particulate and is filtered down to 2 microns. This ensures the fluorescent dye doesn’t change the precise characteristics of the host fluid. Lubricity, viscosity, and other properties of the original host fluid are completely unaffected when dye is added to the system. Spectroline® fluorescent dyes are also NSF-certified, meaning they are not harmful to the environment and went through rigorous testing.

Dye fluorescence is dependent on the ratio of fluorescent material to carrier oil. Poor performing dyes typically have low levels of fluorescent material. Simply put, poor dyes lack the concentration necessary to provide an effective fluorescent response. Spectroline dyes are concentrated and able to fluoresce all leak areas brightly. This means Spectroline dyes are more economical because less dye is used per application.

助溶剂是为了增加特定化合物的溶解度而添加的化学物质。这意味着助溶剂会有害地改变冷冻机油原有的润滑特性。助溶剂会导致过早磨损和彻底损坏。劣质荧光染料通常含有大量助溶剂。除了改变系统特性外，助溶剂还有可能使系统金属老化。

Our core dye products are Universal/POE formula. For AC&R systems using PVE lubricant we have specific dyes for those: SPE-GS1PVE-P6, SPE-GS2PVE-P6, SPE-GS3PVE-P6.

For HVAC/R Systems- EZ-Ject™ is our patented multi-dose injection method and GLO-STICK® is our direct inject, single-dose method that has varing concentration strengths. Both are suited for small-to-medium sized AC&R systems – such as residential units, ice machines, window units, and refrigerators.
BigEZ™ is our injection method for medium-to-large sized AC&R systems – e.g., commercial units, supermarket units, refrigerated warehouses, food and dairy plants, and industrial facilities. Review our product dosage information for the correct application.

Spectroline® offers a variety of dye colors that are engineered to best suit specific host fluids and fluid power applications. Use different colors to detect leaks across multiple systems. Color-code each system to ensure fluid power leaks are found quickly and with immediate certainty.

We care about your health as well as the health of our planet. The materials used in the dyes consist of completely organic-free fibers. It makes our leak detection dyes different from conventional dyes that have co-solvents. Due to its materials, after half a year in the ground our dyes will fully degrade without any harm to nature. The second important thing is that we do not use any chemically aggressive liquids, which can damage one’s health. And finally, UV lamps consume only 10W, which equals to the power of a simple light bulb. In this day and age, energy saving not only has economic benefits, but also enables us to reduce consumption of natural resources as well as emission of harmful substances into the atmosphere.

Spectroline leak detection lamps are specifically designed for leak detection application only. Competitor lamps consist of various numbers of LEDS and the manufacturer designed it with many different applications in mind, leak detection not being the main focus.

We reccomend using a Spectroline leak detection lamp for best results when searching for leaks and in low-light conditions.

(-80C 至 250C)

(-40C 至 200C)

有很多因素决定了你可以节省多少钱，也可以作为一个预防性的维护协议。

我们的荧光和UV 可于 这里。